Download Renko Charting Suite For MetaTrader 4

(Click To Download [ZIG]Renko Charting Suite v187b.exe)


NOTE: You must have MetaTrader 4 downloaded and installed on your computer before downloading and installing the ZIG Renko Charting Package!  If you do not know what MetaTrader 4 is, or do not know where to get it, there are links below in the installation instructions.

Installation Instructions:

  1. If you haven’t yet, download and install the MetaTrader 4 platform.  The MetaTrader 4 platform is a FREE forex trading platform, and is available from 90%+ of US based forex brokers.  If you do not know where to get this software, you can download MetaTrader 4 from a very reputable broker (FXDD) by CLICKING HERE.
  2. Click the download link above (or click HERE) to download the ZIG Renko Charting Suite.  You can either right-click on the link and select “Save Target As..”, or simply click the link and click the “Save” button.  Make sure you save this file somewhere easy to find (suck as your Desktop)
  3. After the ZIG Renko Charting Suite has been downloaded, locate this file (should have saved it somewhere easy to find) and double-click the file to run the installer.
  4. Follow the directions in the installer.  NOTE: You MUST be connected to the Internet when installing the software.
  5. Fill in your First name, Last name, and Email address in the installer when prompted
  6. The software will immediately send you a software key to the email address you specify.  Check your email, and copy the software key into the installer window when prompted.   This will un-lock your software, and allow you to finish the installation
  7. Once the installation is finished, shut down and re-start your MetaTrader 4 platform (if it is running).  The software is now installed, and you can begin going through the training! To view the training videos, scroll to the top of the page and click on the “Training” tab. The “Information” tab holds information pertaining to all things Renko.

NOTE: To see a video of the installation process, CLICK HERE (or navigate to the “Training” page by clicking on the “Training” tab at the top of this page.  The “Installation” video will be the first video in the series).

If you have any problems installing, please send an email to for additional help.  Keep in mind this is a FREE piece of software, so we may have quite a bit of volume in our support inbox.  If you send me an email, please allow a couple of days for a response. I am indeed full time Forex trader and programmer, so my days are usually pretty busy. I will get back with each of you as quickly as I can and get to you all though :-)

  1. ric
    July 19th, 2015 at 17:49 | #1

    Does you renko app work on apple products? If not, then do you know of an app that will?


    • Kevin Eaton
      July 20th, 2015 at 04:19 | #2

      The Renko charting suite only works on MetaTrader 4 platforms, and if I’m not mistaken, a Mac can indeed run MetaTrader 4 (I think via the WINE subsystem). Do some Googling on it – if you can install MetaTrader 4, you can install my Renko software :-)

  2. dominic
    July 13th, 2015 at 14:41 | #3

    so i figured it out i got mash and fast but i don’t have those templates that you created because my mac won’t let me install in the folder with mt4 so is there anyway i can get those templates anther way

  3. dominic
    July 13th, 2015 at 13:41 | #4

    the old one i have is 147 which it doesn’t have everything

    • Kevin Eaton
      July 13th, 2015 at 16:25 | #5


      I’ve recently updated the installer here on the site – it seems with the new MT4 builds that have been coming out, my installer program was having a hard time finding the correct locations to put the scripts, indicators, etc.

      Make sure you close down all of your MT4 platforms when installing. You say you’re on a mac – are you using WINE to run the installer? I haven’t tested it on that at all, and my installer uses some Windows only APIs to search through things like drive letters, etc.

      If you still can’t get it, write me another comment and I’ll send the raw files to your email.


  4. Luis
    July 3rd, 2015 at 15:28 | #6

    thanks for developing this tool. I cannot install the application. It returns error when trying to copy the files of the various parts of the tool to the directories of the MT4 platforms. I suspect it might have to do with the new MT4 structure after 6xx Build.

    Any ideas ?

    • Kevin Eaton
      July 13th, 2015 at 16:58 | #7


      Due to the new MT4 builds, the directory structure and paths for the indicators, scripts, etc. has changed. This caused some problems with some of the people installing for the first time, but not to worry…I’ve got it worked out :-)

      Go ahead and click the download link on the main page again. Make sure you refresh your page first so you don’t download a cached version (just as a precaution). This new installer should take care of everything properly for you, and also includes a set of templates.

      Let me know how that works out!


  5. tony
    July 1st, 2015 at 03:58 | #8

    This indicator does provide enormous inside information about the trend of the instrument. It works like multi-time-frame indicator on regular time based charts. Thank you!

  6. Emubenjere Gabriel
    June 19th, 2015 at 16:10 | #9

    l just wanted to say thank you very much for letting me get this awesome indicator.

  7. John
    September 7th, 2014 at 12:07 | #10

    Kevin ,thank you for your genorisity and skill in sharing such a sophisticated software suite.

    I have been searching for a good Renko indicator /strategy for some time and this looks great.

  8. John George
    July 1st, 2014 at 19:02 | #11

    Thank you for sharing your genius. Got the indicators loaded and am enjoying looking at forex in a different way!

    • Kevin Eaton
      July 10th, 2014 at 19:38 | #12

      You’re very welcome :)

  9. Mathew
    June 27th, 2014 at 15:36 | #13

    Wonderful ! ,let me see how it works.Definitly will give you the feed back

  10. zoltan
    June 18th, 2014 at 15:15 | #14

    You are Great (-:
    I am going to try it and I will keep you on the results

  11. Ayala
    June 15th, 2014 at 22:55 | #15

    I am going to try it and I will keep you on the results

  12. June 12th, 2014 at 05:41 | #16

    Really nice tool, going to try

  13. Simon
    March 13th, 2014 at 14:23 | #17

    wow Kevin, many thanks. I’ll co,e back after I have used it.

  14. stephen
    March 7th, 2014 at 05:10 | #18

    Hi Loved the video.

    Am interested in Renko so that’s why it caught my interest.

  15. Leticia
    August 26th, 2013 at 03:51 | #19

    Kevin, you are a real forex angel. Thanks from the bottom of my heart! God bless you and your family.

  16. Tymen
    August 21st, 2013 at 15:32 | #20

    Thank you, Kevin, for developing this product…..especially thank you for developing it for FREE!!
    Now there are a few definite IMPROVEMENTS I would suggest…….

    1) When using colors, the color is splashed all over the place on the renko bars – big squares of it. This is probably easiest for the computer but is unfriendly to the eye.
    Could you re-write the color part of the software so that ONLY the renko bricks are filled with color (as in traditional bricks)…??
    That would look so much more professional, more natural and much easier on the eye!!

    2) As a retired school teacher, I know that white backgrounds are superior because they are less tiring on the eye and also give greater resolution.
    Therefore, could you add a few lines of programming to allow the bricks have black outlines on a white background….??

    Thanks for reading…….Tymen, Perth, Western Australia.

    • Kevin Eaton
      August 25th, 2013 at 22:45 | #21

      Thanks for your suggestions Tymen!

      1) That makes sense – the current way it’s designed is that it shows each individual box as a transparent “square” object with the left and right portions of the colored box placed as the length of time it takes the renko box to ‘play out’ before the next is drawn – sort of to give a “birds eye view” of the style of charting with time incorporated back in. I just found that creating the box to encompass both time and how high/low the prices goes, it gives much more information. It’s best to only use the colored portion of that particular indicator if you are zoomed out quite far, as it’s best displayed as a far out view of what is happening. I can definitely take your idea into consideration as an update, and give it a switch so you can turn that feature on and off.

      2) Sure, that seems like something that should be simple. I’ll make a note and push it in the next update

      Thanks again!


  17. Mike
    August 20th, 2013 at 22:57 | #22

    If it lets my payroll roll in life i would not hesitate to donate to you.

    Yes Adolf he is wery generous bless him, in this markets people have extrem ego wery rarely you will see people like this in your life.

    Genius genius.

    Thanks again.

    • Kevin Eaton
      August 25th, 2013 at 22:46 | #23

      Thank you so much Mike. I really like hearing stuff like this – it’s why I want to give back to the community as much as I can – to know that traders are getting so much from my software and systems makes it all worth while. Thanks again!


  18. Mike
    August 20th, 2013 at 22:55 | #24

    Thank you. Exellent system.

    You are a genius true genius..

    The man indeed.

    • Kevin Eaton
      August 25th, 2013 at 22:46 | #25

      Thank you Mike :)

  19. Constantine
    August 18th, 2013 at 02:56 | #26

    Hi Kevin

    Thank you for the ZigRenko,
    I will test it and I will get back to you with comments

  20. August 8th, 2013 at 01:52 | #27

    Looking forward to using this very creative indicator.
    thank you

  21. OVI
    August 7th, 2013 at 06:04 | #28

    Thank You. I will try it.

  22. July 27th, 2013 at 14:44 | #29

    I’m impressed, I have to admit. Seldom do I encounter a blog that’s both
    educative and entertaining, and let me tell you, you
    have hit the nail on the head. The problem is something
    that not enough folks are speaking intelligently about. I am
    very happy I came across this in my search for something concerning this.

  23. michael
    July 23rd, 2013 at 08:23 | #30

    Are the indicators available in a ZIP or RAR file?
    Thank you.

    • Kevin Eaton
      August 26th, 2013 at 05:28 | #31

      They are in an install file – watch the installation video on the Training Videos page (link at top of website)

    July 21st, 2013 at 19:06 | #32

    Hi Kevin
    Thanks for all you do we need more of your kind in the world . Just came across your site as i am coincidentally getting very interested in the Renko Charting system.
    I am sure you have answered this question to exhaustion but I will ask anyway. Is there an EA to go with this charting suite if not do you have plans for one in the near future?
    Thank You G Adams

    • Kevin Eaton
      August 26th, 2013 at 05:30 | #33

      Hello George,

      Thank you for your kind words :-) Tonight, I wrote a lengthy paper describing why some systems (including Renko) don’t make logical sense in a fully automated system. Also, I explain something that is MUCH better than full automation in this case, and how you can apply it to your trading:

      I hope it sheds some light on the whole situation :) Thanks!


  25. Dan
    July 19th, 2013 at 21:51 | #34

    thanks for providing this suite

  26. AARON
    July 4th, 2013 at 17:48 | #35








    • Kevin Eaton
      August 26th, 2013 at 05:31 | #36

      Thanks for your kind words Aaron :-)


  27. Slai
    June 28th, 2013 at 15:03 | #37

    At last i was able to downloaded the software and its is great :) . Combine with mtf trix meter it gives better entry and exit level . Excellent Job wish the version is updated sometimes.

  28. michael
    June 26th, 2013 at 13:49 | #38

    thanks heaps for the renko system! It looks real promising
    on demo…Im hoping to go live with it soon…thanks again!

  29. AlanD
    June 22nd, 2013 at 02:31 | #39

    HI Kevin, Thanks for the use of your magic software, I guess you must be a wizard. I have never had a great deal of success as a trader. This software also teaches the valuable virtue of patience.. I desperately need this type of asset. However all I have to do now is… “Just follow the yellow brick road” !!! Thanks again AlanD

    • Kevin Eaton
      August 26th, 2013 at 05:34 | #40

      Thank you for your kind words Alan :) I hope it brings you success


  30. June 19th, 2013 at 03:40 | #41

    What’s up, the whole thing is going nicely here and ofcourse every one is sharing information, that’s really good, keep up

  31. AlanD
    June 16th, 2013 at 23:40 | #42

    Perhaps my gateway to success AlanD

  32. Ray
    June 13th, 2013 at 05:09 | #43

    Thankyou so much! Awesome looking trading software suite. Very keen to give it a try


  33. May 14th, 2013 at 00:25 | #44

    Thanks so much for your excellent software. Am still experimenting with it to try to come up with a consistent strategy.

    One idea I’m working on is this – if I put the Mash on a chart (where RenkoBox = 40 / MultiStart = 20 / MultiEnd = 500 / MultiStep = 30), when the Mash indicator reaches either the top or the bottom of its range (where the range for each timeframe differs – for example in one timeframe the highest/lowest of the range could be +-16.1 or +-17.6, whereas for another timeframe it could be +-8, though usually the highest/lowest value would exceed +-10), it becomes a possible indicator for a big trend reversal.

    My idea/question for you is this – is it possible, when you have time, to look into building an addition visible warning sign/feature to the already excellent Mash indicator, to have an additional alert or signal somewhere on the chart that shows when the Mash value of different timeframes have ALL come into agreement in either their high’s or their low’s (i.e. the Mash indicator of Monthly, Weekly, Daily, H4, H1 and may be even 30m have ALL reached the extreme end of their respective ranges). When such a scenario happens, it might be highly likely that the price of the pair has reached either the medium-term top or the bottom and is getting ready to exhibit a powerful trend reversal at any time.

    For example, let’s say the USDJPY price had been dropping for a long time in the last few months, and at one point, the Mash for the Monthly dropped down to the lowest value of -17.6 and stayed there. After some time, the Mash value for the Weekly also dropped down to -17.6 (or 16 or whatever is the historical low value of the range for the Weekly USDJPY) and continued to stay there. After yet some time, the Mash value for the Daily and the H4 also came to their lowest values based on historic values in their ranges (e.g. -16). When finally the H1 Mash value also came to its lowest value, this additional signal or alert which I am suggesting for you will give a visible+audible warning to the trader that there is now a confluence (match) in the Mash values of most of the higher timeframes reaching their lowest Mash values, and that any time from that point on the price would rebounce. The probability of such a rebounce would be exceedingly high, because usually such a confluence would not happen for quite some time.

    If such an additional feature can be built into the Mash, traders may be able to trade off such signals even without the Fast indicator.

    An alternative is to create an offline alert to be opened as an offline chart which does not show the price but only shows the values and the colors (redder color for lower Mash value, greener for higher Mash value) of the Mash indicator for different timeframes:
    Monthly – Most Red
    Weekly – Most Red
    Daily – Very Red
    H4 – Red
    H1 – Orange
    30m – Yellow
    Overall – -90% (shows the extent of all timeframes reaching their lowest range values; where the maximum is +-100%)

    This would enable traders to see at a glance the overall Mash values of all timeframes in one offline indicator/dashboard. As well, this “across-the-board Mash indicator” might become a powerful medium- to long-term trend indicator with results which other indicators cannot replicate.

    If you have question about this idea, please email me directly.


    • Kevin Eaton
      August 26th, 2013 at 05:48 | #45


      Thank you for your well thought out response and suggestions! I’ll be making some updates to the Zig Renko suite shortly – in the mean time, I’ve been working on a semi-automatic approach to trading the indicators that have pretty much changed the way that I look at the system itself, and it’s trading possibilities. I wrote a paper on it and posted it here on the server. You can find it here:

      I go into great detail about what I do to trade the system, custom mods I’ve made, and how it works.

      I’ll let you know when the next update comes out


  34. January 26th, 2013 at 01:53 | #46

    Really wanna try it

    Thank you

  35. Joe Bowling
    January 19th, 2013 at 01:03 | #47

    Thank You. I will try it.


  36. adolf
    December 20th, 2012 at 18:14 | #48

    Hi Kevin.
    With so many scamers out there it is hard to belief that someone is so generious like you.
    I want to thank you very much.

  37. Robert
    August 19th, 2012 at 02:57 | #49

    Thanks for the quick response.

    I found the Script, loaded it, and got my Renko chart. Now starts the learning process.

    Thank you again, Robert.

  38. Robert
    August 17th, 2012 at 05:50 | #50

    Thanks for the download. I have installed the Fast and Mash indicators. Looks good, but I don’t have Renko bricks, only candles. How do I correct this? Thank you, Robert.

    • admin
      August 17th, 2012 at 22:45 | #51

      You’ll have to look in your “Scripts” section – the Renko bricks is a script that will create an offline chart for you. Attach the script to the lowest timeframe chart possible (for the best accuracy) and go to File->Open Offline… and select your renko chart (example: EURUSD will be EURUSD_rko)

  39. Tony
    August 15th, 2012 at 00:48 | #52

    Hi Kevin,
    I just come across your site after I was searching for EA based on Renko charting , and found your indicators and I have to say you have done a great Job, I can see already that this can be made in to EA , after reding all the comments on your blog and you mentioned that you actually have made it , I would like to know if you have done any more testing on it, I would love to try it , as I don’t have much time to be in the front of computer, I am working hard and I think this would help lot of us here, if it was automated and profitable , looking at your charting method it is just perfect , I don’t think anybody here would disagree , and I definitely would not blame you for any loses, judging by your ethics and your work detail , most of us would be so grateful for it, for such help , most of us have been scammed by scammers, it is so nice to come across a genuine person with your ability to help us to try to make some money , I and most of us would appreciate this so much Kevin , if your time permits .

    Thank you so much,


    • admin
      August 17th, 2012 at 22:45 | #53

      Thank you for your kind words! :-)

    • admin
      August 17th, 2012 at 22:58 | #54

      It is always good to hear that people are making good use of my software and ideas – thank you for taking the time to write! I have indeed made an EA with these indicators (a simple renko EA that is traded on a static renko brick chart) using basic entry and exit rules as a “proof of concept”. I intend to take the next logical step and create a fully functioning auto-trading piece of software that utilizes the MASH indicator and that specific idea (will more than likely be a script as opposed to an EA – a script can do everything an EA can do if put into a loop, except it has the capability of executing instructions based on time rather than waiting for new ticks to come in). I’m quite sure that a long term system can be made from this, and with the proper money management and error checking, can be an absolutely amazing “set and forget” auto-trading system capable of picking and following trends with high accuracy. I may even go as far as to add some of the “out of the box” things I’ve created, such as fully animated GIFs showing you X amount of time before and after the trade is placed, remote cell phone notification complete with screenshots, and much more!

      With all of the time and effort I would put into something like this, I may have no choice but to have to charge for it in order to make up for lost time. Of course, I would keep the cost low (less than 100 bucks for the whole thing)…and I would only do it if you guys would be open to it, and not immediately label me some sort of “scammer” or “marketer” just out to make a quick buck. I’d much rather hold off on both the time and the effort if it would cause a negative outlook on me or my work…but honestly, if you guys are sincerely open to it, I can package together a HECK of an auto-trading renko “plugin suite” to help those out who are unable to trade this system manually :-)

      Let me know what you guys think! It would be great to hear back from you on this one.


  40. Garry
    August 14th, 2012 at 19:33 | #55

    Hi Kevin
    I trade using foint & figure on paper so renko bars looks like a nice complement.
    could you tell me how to resolve the static bars, when I open up the bar chart.I
    do keep the script chart running .

  41. Wessel de Vries
    August 12th, 2012 at 18:04 | #56

    Hi there.
    I’m trading forex for a few months now, and just start working with renko charts.
    Your indicators look very promising, i’m gonna try them rightaway!
    Great that you’re giving them away for free, many thanks!

    Question: are you going to publish a MetaTrader 5 version in the near future?
    My broker just starten supporting mt5 and it contains some nice features.

    • admin
      August 14th, 2012 at 16:42 | #57

      More than likely YES on the MT5 version :-) Have many things going on right now, but as soon as I get to it, it will be done!


  42. Johan
    August 12th, 2012 at 06:02 | #58

    Hi Kevin,

    Can’t wait to try this system tomorrow since today is a Sunday.


  43. Dao
    July 30th, 2012 at 17:07 | #59

    Nice Tool,
    will see how usefull is for my trading.

  44. Femi
    July 29th, 2012 at 10:09 | #60

    Hi there,

    I only discovered the Renko charts this weekend and have already started testing and reviewing various charts with it. I would want to thank you guys for these indicators as you have made things more clearer especially with the Renko Mash which I intend to use as a trigger before initiating any new trade. As good as these indicators are would it be possible to code something around the Renko Mash to raise alerts like emails once the histogram values turns positive or negative. All the same you have done a very good job and respect your generosity in sharing this to the public moreover, the Renko method of trading proves there are real pips to be made as all the comments i’ve read about it’s use are all positive.
    Once again thanks for sharing and more greasesssssssssssssss.


  45. Terry Rimmer
    July 22nd, 2012 at 05:01 | #61

    Hi I now have FAST and MASH working. My problem was caused by the Installer placing the Renko files in the wrong directory.

    Thank you for your patience

  46. Terry Rimmer
    July 21st, 2012 at 07:57 | #62

    I downloaded and installed . All seemed OK however in my Custom Indicator menu the only option I have is ZigZag. There is no Fast or Mash selection?

  47. Terry Rimmer
    July 21st, 2012 at 07:20 | #63

    All OK thanks, now received your email. many thanks

  48. budi
    July 20th, 2012 at 07:08 | #64

    hi.. dear

    I learn it

  49. George Gahler
    July 19th, 2012 at 12:33 | #65

    I just come across your renko suite on youtube and did a google search for the download link

    landed on this page and spent the last 2 hrs reading all the commments
    i congratulate you on openness and generosity = that makes you 1 in a 1000 from all the crap peddlers out there.

    no I download it and learn all about renko

    warm regards


  50. SHELLZ
    July 16th, 2012 at 05:38 | #66


  51. Jose Vieira
    July 13th, 2012 at 23:54 | #67

    Muito bom! Thanks.

  52. David
    July 12th, 2012 at 13:33 | #68

    Hi Kevin and everyone, First and foremost, a BIG thank you to Kevin for giving us this software. I have just installed it and can see how valuable it is going to be, especially the MASH. I have not been having much luck with FX using some expensive systems that people have sold me – I was about to give up! Anyway, I hope that the Renko system will make some money for me. My question is, is there a consensus about what settings to use for the MASH, in particular to optimise the zero crossing points. I have 10, 200, 10 at the moment, and seems to work well on the usd/eur. Im guessing that different settings should be used depending on the pairs. Anyone got any suggestions?

    Many thanks,

  53. SatchFan
    June 14th, 2012 at 15:59 | #69

    I have an update:

    I am currently writing a trading plan using the Renko Mash as the ONLY indicator. Renko Fast is on the charts too but not for providing signals. I’m using the 4hr charts and Mash to provide the signal and using a 30 min chart and Mash for confirmation. I requested earlier for an alert for when the indicator crosses zero. I would like to amend that request and ask that the value of the indicator alert be user definable. I have different levels on the 4hr charts vs the 30 min chart that I would like to be alerted to. I’m still using trendlines to exit. The only thing that I don’t have that I need is the alerts to make my trading plan complete.

    So Kevin, I was wondering if adding the alerts to the Mash is very high on the list of things to do and if so, would it be released in say about a couple of weeks? If not, I guess I’ll have to find a coder and pay to have it done, no big deal.

    Happy Trends!
    SatchFan :)

  54. SatchFan
    May 31st, 2012 at 15:50 | #70


    Congratulations on writing these excellent indicators! I have been trading since 1997 and I found these to be very useful! Most of the indicators I have seen over the years are just crap, but these have some great value! I have been playing around with some of the settings and have found some that work for me. Your observation about buying/selling when crossing zero on the mash indicator is pretty good. But, instead of holding the position(s) until it crosses back over zero, I prefer to use a trendline break to signal when to get out. (4 hour charts) Currently I’m using a free EA called Tipster Trendlines to manage that process.

    The Renko Fast indicator is very interesting also. It’s interesting to see how the market will retrace back to the lines of the Fast indicator when set at the correct number for that market! A 75 pip setting is a good place to start for the forex pairs.

    Anyway, I have 2 requests for changes that I would like for you to consider to do in the very near future. I know your probably a very busy guy, but I think you could do these 2 in a very short matter of time if you set your mind to it.

    Change #1. Please add a user defined option in the Mash indicator for an alert for emails/texts/sound for when the indicator crosses zero. This is simply a must have option. No one can sit at the computer (or vps) all day watching if this has happened. I know Peter has already mentioned adding this feature but it’s just so important I wanted to mention it again. I really do believe this option is a must to trade the Mash setup correctly!

    Change #2. On the Fast indicator, could you add a user defined option for where to place the Multi Box information on the chart. I would prefer to have it show on the right side of my charts as I use the “Chart Shift” function and would prefer the Multi-box info go on the right as to not plot over the price bars and the Renko Fast box lines.

    I would give it a try to add these features myself (even though I’m not really a coder, more of a hacker lol) but since you have your indicators locked down tighter than Alcatraz (I don’t blame you) I’m not able to give it a try. I hope you find it in your heart and schedule to make the time to add these features, ESPECIALLY the zero cross alert to the Mash as I truly believe it is a must!

    Thank You for reading this and a Big Thank You for posting these and making it free! These really are very useful indicators, Especially the Mash! I hope you can find the time to amend them very soon!

    Happy Trends!
    SatchFan :)

  55. Mark
    May 24th, 2012 at 20:46 | #71


    Only now (5/24/2012) came across this site and can’t believe you’re doing this for (choke!) free?! About to download and looking forward to learning. Not at all as successful as hoped with regular bevy of indicators both piad for and free. Your site seems like a breath of fresh air – ie. no hype, no forward sales, no stupid promises, etc. Thanks for your kindness and generosity. Will update when put into play and let you know the results.

    • admin
      May 31st, 2012 at 16:58 | #72


      That’s the beauty of P-Zig (my company)! Here’s a little known “fun fact” about the forex market. The forex market IS real, there is NO scam with the market itself – you CAN indeed make a virtually limitless amount of money. Seriously. It can be one of the absolute best ways in the entire world to make money. Unfortunately, because of the possibility of unbelievably high returns, there are MANY scams and liars/cheaters out there. It happens ALL the time. I’ve actually done work for these guys before, not knowing that I was helping to code something that was purely for marketing purposes, and had nothing to do with helping people to make money legitimately. Once I found out, I was discusted..appauled…and vowed to never do it again.
      I have the coding expertise to make pretty much any piece of software for MT4 (I’ve made over 12 million dollars in forex software over the years…), and since many of you have been ripped off by these so-called “traders” promising unrealistic gains and delivering nothing….I don’t see a point in charging money for those things that I feel will really help you guys become better traders. That’s what we are all here for – to make money…NOT to give it away to somebody who has a piece of crap that they say will make you a millionaire, yet have never traded a day in their lives. The industry (you people!) has been SO good to me, I feel this is the best way that I can give back. Enjoy, and I really hope it brings you my kind of success!


  56. J Dennis
    April 28th, 2012 at 02:56 | #73

    Great!!, i will be anxiously waiting!!! best regards.


  57. Ahmad
    April 20th, 2012 at 15:38 | #74

    thanx…i will back test and reply

  58. Heinz Zeh
    April 18th, 2012 at 12:12 | #75

    Hi Kevin,

    This is the best I have seen in a long time. I will test your System now and come back with a full report.

    Thank you

    Heinz Zeh

    • admin
      April 24th, 2012 at 21:39 | #76

      Thank you for your kind words Heinz :) Let me know how it works out!


  59. Peter
    April 17th, 2012 at 09:56 | #77

    Hi Kevin, finally figured out why it wasn’t loading….it was, but in another copy of Metatrader!
    If you have time, & feel inclined, would it be possible to a ‘Zero’ cross alert? User choice of input for sound alert?

    Many thanks for the very generous gift. I have traded RENKO for some years, now it’s even easier. Thanks again.

    • admin
      April 24th, 2012 at 21:40 | #78


      Yeah sorry about that, I’m creating something now that will install them to ALL MT4s on your computer. I already have the technology and the program, just need to implement it.

      I’ll take your other suggestions into consideration – thank you!


  60. alex giap
    April 16th, 2012 at 02:33 | #79

    Thanks so much for your generosity and honesty.

    I was able to get all the files installed properly including creating several renko charts in MT4.

    However these charts were not moving in a live market at all even though I did uncheck the “offchart” in the properties section and I did have
    the originating charts remained open.

    Please tell me how to get these renko charts to “live” for real trading.

    Best regards,


    • admin
      April 24th, 2012 at 21:41 | #80


      As long as you have the script attached, the offline chart should update “moving forward”. I’ll double check this for you, and make sure this is the case…I’ll let you know what I find ASAP.


  61. John
    April 12th, 2012 at 08:29 | #81

    Hi, I am new to Renko and this looks like it will help me a lot . Thanks John

    • admin
      April 24th, 2012 at 21:41 | #82

      You’re very welcome John :-)


  62. J Dennis
    April 8th, 2012 at 01:10 | #83

    Hello, Kevin, i am very intersted in the Zig_TickCharts_v162.exe plugin, i tried to download it, but not working could you please help me!!!, i will appreciate it lots!!! i´m trying to build a tick chart to trade oil, 500 ticks and using better volume indicator with professional and amateur volume, please could you share the file for tick charting??!!! please!! thanks!!!

    J Dennis.

    • admin
      April 25th, 2012 at 16:14 | #84

      J Dennis,

      I haven’t been able to finish that plugin just yet – that is scheduled for release here pretty soon. As soon as it is, I’ll be sure to notify you (and all of you) as soon as it’s done!


  63. Philip DeHaan
    April 2nd, 2012 at 09:02 | #85

    Hi, I love the concept of your software. I downloaded the MT4 platform with Oanda. It took a while to get the login to work. I do have full access to the MT4 program now. I ran the setup before I got the login working. But now I am not able to find the ZIG RenkoCharting suit under the Indicators. How can I fix this? Thanks for the help. Phil

    • admin
      April 25th, 2012 at 16:16 | #86


      You need to make sure, when installing, that you are selecting the appropriate directory. See the installation video – when you get to the directory screen in the installer, simply make sure that you click “Browse” and select the directory of your MetaTrader 4 program you wish to install the Renko Suite to.


  64. Clif
    March 31st, 2012 at 02:13 | #87

    I had to reinstall FXDD-MT4 and need help with reinstalling Simple Forex Tester for the new MT4. I have sent full explanation to your 2 support emails. I have to say you do some great work and I don’t want to be without it, Thanks Kevin.

    • admin
      April 25th, 2012 at 16:16 | #88


      I’ll make sure the support staff looks through and finds your email. When you install Simple Forex Tester, you’ll need to make sure you’re selecting the proper MT4 directory. When you get to the directory screen in the installer, click “Browse” and make sure that you’ve selected the proper MT4 installation.


  65. Scott
    March 29th, 2012 at 14:03 | #89

    Kevin, this is a very generous program you’re offering. I’ve been excited about Renko trading and am happy to have found you on YouTube. I know I will gain alot of skill with your experience and systems.


  66. Liam
    March 24th, 2012 at 01:21 | #90

    Genuinely useful, and much appreciated. Thanks, Kevin.

  67. Tsmitty
    March 23rd, 2012 at 22:50 | #91

    Can’t wait to look this thing over this weekend! My quest will be to find a simple indicator
    with email alert that will work smoothly with the program. (I still need to work for a living)! :)
    Any suggestions?

    thanks in advance.

  68. Vincent
    March 16th, 2012 at 05:32 | #92

    you can use wineskin (free) to run MT4 on Mac OSX


  69. orit
    March 9th, 2012 at 06:29 | #93

    Thank you very much kevin …it’s hard to find some one that give is time and its knowledge for free …
    I was research on the internet for renko indicator and i find your tool … and its can help me very much on my trading!
    But i’m working on the future ES, its can be modify to the ES market that the price on every pips (tick) is 0.25 ?

    thank you,

  70. Graeme
    March 8th, 2012 at 09:26 | #94

    Kevin, Would it be possible to add an external attribute that would allow the user to define how many lines down from the top of the page the MASH results commence to display, this would allow for other indicators and also 1 click trading functions to sit in the top LHC.

  71. fluffy
    March 6th, 2012 at 15:42 | #95

    Very nice and effective

  72. Graeme
    March 6th, 2012 at 00:26 | #96

    Kevin, You are the greatest, thank you for the tools that I know will help me with my trading.

  73. David
    March 2nd, 2012 at 18:06 | #97

    I am fascinated and ‘grinny’ about the loads of filtering that the renkos do for a trader! I am hoping that your indis will do justice to that filtering, because some of the regular indicators get confused with the renkos many times.

  74. Kim Wing Chow
    March 1st, 2012 at 06:14 | #98

    WoW, this is awesome. I like its simplicity. Wonderful Kevin. Hope to learn more from you. Thank you.

    February 25th, 2012 at 20:30 | #99

    Excellent Job!! But not working on my MT4 Platform.

  76. Fran
    February 12th, 2012 at 18:39 | #100

    I have a Mac, so MT4 is not compatible (EXE).
    I can’t recall where, but I’ve seen that Renko can work (better?) without MT4, which would be great
    for Macs. Can your system be made to accommodate Macs ? . . . sure hope so !
    Thanks, and I appreciate your generosity.

    • admin
      February 13th, 2012 at 22:49 | #101


      The indicators/plugins (Zig Renko Charting Suite) are made for MetaTrader 4. While MetaTrader 4 is a Windows/PC program, you can definitely have it work on a MAC. All you need to do is install MetaTrader 4 on your MAC, and you’re ready to go! By the same means, you should be able to run the installer as well. Usually, this is accomplished by attaching what is called a “Windows Emulator” (such as WINE) to your Mac system. Then, you can run both MetaTrader 4 as well as the Zig Renko Charting Suite! You can find more information by going to Google and type in “MetaTrader 4 Mac”. The top few results will be what you are looking for (I believe there is even a YouTUBE video showing you how to do it). I hope this helps! If you need anything else, please let me know.


  77. logger
    February 8th, 2012 at 20:00 | #102

    You are a MT4 programmer, have you attempted to program these indicators into an EA yet? Can this be done with Renko? An EA is a very quick way of testing strategies over particular time / market conditions etc.

    • admin
      February 13th, 2012 at 22:56 | #103

      Thanks for taking the time to write in :-)

      I have indeed taken the time to code this into an EA, but ONLY for the purposes of testing the indicators themselves to make sure they were stable enough for release, and to check the concept to make sure that it was strong enough to actually pull in a profit. I have both proven that the indicators are sound, and the theory is sound as well. The EA itself was not meant to trade on a live account, but was meant to run in the Strategy Tester part of MT4. While the EA can be adapted to actually trade live, I haven’t quite had the time to complete it to that point yet.

      I’ll do this for you though. In the event that I actually do get the renko EA to the point where I’m comfortable with it, I’ll pass it along to each and every one of the Zig Renko users free of charge. Remember, I’m only in this to make sure everybody has a fair chance of success in the forex game, and I truly believe that the Zig Renko Charting Suite helps you to achieve just that (plus, you can’t beat the price either!).

      The cheviot to this is obviously I will NOT be held responsible for absolutely any loss that happens on your account. I can build all of the tools I want to and pass them out, but the last thing I want is for somebody to blame me for any losses that happen.

      So, with that in mind, I’ll definitely pass it on to you guys if I ever get it to that point :-)


  78. Jas
    February 2nd, 2012 at 04:25 | #104

    Hi Kevin,
    Thanks for the software. I downloaded it into my MT4 but could not find the Renko indicators in the custom indicator section.
    There was no error message during the installation so I’m assuming the installation is ok. Appreciate your help.

    Thanks again.

    • admin
      February 6th, 2012 at 16:22 | #105


      Usually, this means that you installed it in the “wrong place”. When installing, when it gets to the directory where you should install it, make SURE this directory is the MT4 directory in which you want to install the indicators. If it’s located at “C:\Program Files\FXDD – MetaTrader 4″ then make sure you hit “browse” when it asks for the directory and point it in that location.


  79. ali
    January 28th, 2012 at 15:46 | #106

    hi kevin

    thanks for your gift.. ı have used renko mash with some pairs(mostly 15 minutes) and gold 15m too. first ı had realized in gold that it was repainted. let me explain : ı got bars to down below in r.mash which means it changed its direction then a few bar later r.mash gave signal to another direction. everything is ok. but later ı checked the chart and realized that downword signal turned to up. it totally gone it doesnt seem downword signal anymore . ı hope ı could make it clear. ı dont know may be it is gold(volatility) but when ı saw this ı disappointed about it. ı stopped to fallow it with other pairs. does it repaint or do ı have something wrong with me?thanks anyway kevin

    • admin
      January 30th, 2012 at 20:00 | #107

      The indicator itself should never repaint — you may be looking at the volatility of the pair (gold). When you get a signal, or it crosses the 0 line, there may be a chance during hte same bar where the currency pair switches direction and you get a signal to go in the other direction. I usually like to wait until the bar has closed, and we have a definite reversal before making any decisions (I don’t normally make decisions intra-bar).

      Thank you, and keep the comments coming!


  80. Peter
    January 25th, 2012 at 16:58 | #108

    Hi Kev,

    Many THANKS for such a great tool. I took SEVEN trades today with your tool and ALL were winners.

    Thanks once again.


    • admin
      January 27th, 2012 at 12:37 | #109


      It’s my pleasure :)


  81. Hannes
    January 12th, 2012 at 07:36 | #110

    Just downloaded the app so still need to test it. Sounds like the sort of indicator that I’ve been searching for, in preference to dumping a heap of indicators on my MT4 and trying to make sense of it. Many thanks, great present.

  82. Charlie
    January 2nd, 2012 at 17:22 | #111

    I have been trying to reach re: your tester software but can’t get a response. It is a great tool, and works excellently with one exception. It’s VERY VERY slow. Took me 4 hours to get thru 12 hours of 15m bars. I would love to really use this tool. Any suggestions on why it operates so slow?

    Please Please Please help.


    • admin
      January 9th, 2012 at 15:44 | #112


      I’ll definitely take a look at why it’s taking so long for you to get a response. That does seem abnormally slow — the first thing that I tell people (and seems to fix 90% of the cases) is to check your Strategy Tester window inside of MT4. There is a slider at the bottom of this window that control’s Strategy Tester’s speed. Make sure that this slider is ALL THE WAY UP to the 32 number. If not, then Strategy Tester will run VERY slowly, and in turn Simple Forex Tester will run much slower than normal.


  83. December 26th, 2011 at 07:01 | #113

    Hi Kevin,

    What a great set of trading tools=). Thank you Sir.

    Bye for now,
    Marco Rod

  84. Randy Price
    December 22nd, 2011 at 01:09 | #114


    i was enjoying the holiday gifts (indicators) sent so far but
    they have all disappeared completely from my computer
    what happened ?
    I want them back

    • admin
      December 22nd, 2011 at 19:04 | #115


      That’s a very odd thing to have happen — all of the software that I give out is “independent” from one another. This means that no one piece of software is necessary, or even “tied”, to another. So if one is removed, all the others should stay there. Sounds to me like some sort of “roll back” on your computer, or maybe some anti-virus put your files back where they were before you started installing my software.

      Go ahead and re-download the software from this page — if you need a list of all of the gifts I’ve been giving out, then just email me and let me know and I’ll be happy to help.


  85. David
    December 21st, 2011 at 08:15 | #116

    Hi Kevin,

    Just wondering what does the “ZIG Renko script” do, I downloaded the indicators onto the charts but dont know what the Script does?

    Thanks again Kevin

  86. mel
    December 20th, 2011 at 13:58 | #117


    do u manage accounts?
    i would really like to hear from you.



    • admin
      December 21st, 2011 at 22:47 | #118

      I do not personally manage accounts, but I know some people who do! And they use my software to do so. I’ll shoot you an email.


  87. Al
    December 16th, 2011 at 04:27 | #119

    why do you feel the need to have an exe to get the script installed?
    can you make the indicator/script files available?
    Sorry exe’s rise red flags for me

    • admin
      December 16th, 2011 at 14:29 | #120

      It’s an install file. Makes things automatically install where they need to go :)

      Don’t worry, nothing is wrong with it. An EXE is no more dangerous than ex4 files are, believe me.


  88. J_C
    December 15th, 2011 at 14:43 | #121

    very cool tool. thanks for being considerate.

  89. Craig
    December 15th, 2011 at 12:38 | #122

    Hey Kevin,
    Thank You for the great software. I’m new to Forex so I have no idea what to suggest to you. Currency Messenger??
    Guess I’ll leave it up to you. Today’s the 15th and I’m anxiously waiting to hear from you.
    Thanks Again,

  90. Terrence Meltz
    December 15th, 2011 at 03:38 | #123

    hey kevin cool i am trying to look back in history and its true so far i want to learn more on this indicator as far as my simple back test its 100% so far

  91. Jo
    December 14th, 2011 at 22:42 | #124

    This looks an excellent tool. Many thanks for your generosity, Kevin.

    December 14th, 2011 at 14:53 | #125

    Extremely interesting. I personally trade with price action strategy always on M15 and M30 without using any indicators. The only thing I do is to compare the trends on a higher time frames. When I find a proper trend similar to higher TFs, I simply enter the trade. The indicators provided free here will definitely boost my trading strategy. Thanks for providing your valuable indicators.

  93. casper
    December 14th, 2011 at 12:10 | #126

    What atool thanks Kevin

    • admin
      December 14th, 2011 at 14:21 | #127

      You’re welcome!


  94. December 14th, 2011 at 07:26 | #128

    Wow! This is a great offer! and very generous of you to make it available.
    This WILL fast-track my trading I know, and it can do the same for many other aspiring traders too.

  95. Brent
    December 14th, 2011 at 02:57 | #129

    Thanks Kevin,

    Iv’e been looking at Renko Charts through Ninja Trader I have had Renko on Mt4 in the past but had a few bugs so look forward to viewing this. I will download and test some strategies using your “Simple FX Tester v_2″

    Cheers Brent

  96. yfjghf
    December 13th, 2011 at 23:45 | #130

    i’ll download & well see if i try it

    sounds goiod

  97. perd this will just add to the systems usefullness,rie
    December 13th, 2011 at 23:16 | #131

    damn keyboards got a mind of it’s own, time for new laptop
    this will add to the accuracy and usefullness of JJ’s system
    thank you very much

  98. perd this will just add to the systems usefullness,rie
    December 13th, 2011 at 23:15 | #132

    I am using a renko package from another trader ( J J glenellis) an

  99. robert John Montague
    December 13th, 2011 at 22:13 | #133

    Hi Kevin,

    I’ve downloaded your Renko soft ware but do not have any instructions for setting it up? I’m assumming that instructions will follow.

    All the best and many thanks

    John Montague in the United Kingdom.

  100. Bob Bowley
    December 13th, 2011 at 21:57 | #135

    Hi Kevin

    Thank you so much for making Renko available it looks superb and I am looking forward to get working with it. I will let you know how I go.

    A great Christmas present thanks a heap

    Bob Bowley

    • admin
      December 14th, 2011 at 14:17 | #136

      You’re welcome, Merry Christmas!

  101. Frank
    December 13th, 2011 at 21:48 | #137

    Just increadable, how powerful this tool seems to be. Thanks very much for your generosity. I can’t wait using it.

    • admin
      December 14th, 2011 at 14:17 | #138

      It’s my pleasure frank :) Happy Holidays!

  102. randy
    December 13th, 2011 at 21:37 | #139

    can this system be used in a simple format to scalp ? thx

    • admin
      December 14th, 2011 at 14:16 | #140

      Absolutely :) check out the video!

  103. Vickyl
    December 13th, 2011 at 20:40 | #141

    Good software. It helps me hang on to crop more pips. Thanks pal. Waiting to gather all you have for us as you promised (Baskets of xmas gift)

  104. yusuf
    December 13th, 2011 at 20:35 | #142

    This software very good reply Kavin. Ihave never met as powerful as this indicator.
    Thank you, i will be use in my trading.

    • admin
      December 14th, 2011 at 14:23 | #143

      Thanks for the kind words yusuf, enjoy!


  105. Hayne
    December 13th, 2011 at 20:10 | #144

    What an amazing Christmas gift — THANKS! :)

    • admin
      December 14th, 2011 at 14:23 | #145

      You’re welcome, happy holidays!


  106. Tarek
    December 13th, 2011 at 19:49 | #146

    Thanks Kevin for this software.
    What about setting the stops and targets?

  107. Ralph
    December 13th, 2011 at 18:56 | #147

    Looks like a GREAT idea . I believe non-timebased charts are superior anyway in these days.
    In case the tools work I am off course willing to pay for an upgrade – or maybe an automated trading system.

    Thanks for letting us try.


    • admin
      December 13th, 2011 at 19:04 | #148


      Thank you for your kind words :) Time based charts create too much clutter in my humble opinion. Let me know how it works out for you!

  108. Albert
    December 13th, 2011 at 17:32 | #149

    What a great tool to have trading the Forex markets. Kevin, thanks I will test it out

    • admin
      December 13th, 2011 at 18:10 | #150

      It’s my pleasure Albert! Let me know if you have any questions.

  109. ihab
    November 8th, 2011 at 20:13 | #151

    Hi Kevin,

    I can only get Renko offline to work, but the other fast/mash indicators will not show in my list of custom indicators.

    Can you please help?


  110. Samson
    October 28th, 2011 at 02:32 | #152

    Thanks Kevin for taking the time and effort to program this free trad able software. The thing I like about this software is the option to trade the colors. One question if I want the option to switch to actually see little Renko bricks being developed on the chart, which input value do I have to change?

  111. Bernd
    October 10th, 2011 at 15:49 | #153

    Nice, thanks a lot, BUT I found some small bugs:
    renko-script & renko-fast draw different graphs(not the same h/l) when set to same settings(and the offline-chart does not update).
    the on screeen text and the renko-mash do not show the same information when set to the same settings.
    on screen I have 5 box-sizes. then all of them say:UP the mash displays a 4 and not the expected 5.
    could send you screenshot, but don´t know how.
    one wish for renko-fast to be even more usable: dotted lines(with on/off switch) which show where the next box would be drawn.

  112. September 28th, 2011 at 15:40 | #154

    thanks to you I didnt waste my money

  113. WANDA
    September 26th, 2011 at 17:10 | #155

    Your renko mash looks to be a brilliant idea and I would love to use it on equities. I currently run Ninja Trader with the native renko bars included in version 7. Will you be offering your indicators for other platforms or is their any workarounds to get your current stuff to work in Ninja? Thanks

    • admin
      September 28th, 2011 at 18:33 | #156


      I am thinking about it, I have basically “mastered” MT4 which is why it’s written in that language. I will certainly be looking at adding different platforms.


  114. September 22nd, 2011 at 01:05 | #157

    Incredible, that’s just what I was searching for! You just spared me alot of digging around

  115. Harry
    September 7th, 2011 at 11:06 | #158


    Great video and indicator looks fantastic, i have been trading renko for a few years now.

    Can you please email the link to the Renko Mash indicator.


    • admin
      September 23rd, 2011 at 14:55 | #159

      The Renko Mash indicator is already on the site — on the main page ( you’ll find the download button. Renko Mash is actually in the install file :-)


  116. Nick Savvas
    September 6th, 2011 at 07:20 | #160

    Hi Kev it looks great and i am willing to give it ago
    Thank you for your generous jesture

    • admin
      September 23rd, 2011 at 14:59 | #161

      I’m glad you like it Nick!


  117. Jim
    August 30th, 2011 at 06:23 | #162

    You mentioned using this for some months now, what are some of your successful settings and methods? Please give us your input. Thanks.


    • admin
      September 23rd, 2011 at 15:07 | #163

      Some of my favorite things to do with it is to use Renko Mash in order to give me trend direction. Once I have that established, I can use stop losses and take profits the size of my boxes (renko on chart indicator) and actually ride the trends for quite some time! I’ll be making more videos soon outlaying exactly how I go about placing trades with these indicators.


  118. Nick Rayne
    August 29th, 2011 at 19:07 | #164

    Hi Kevin,

    many thanks for sharing your strategy and indicators – excellent! May I ask which your preferred box size is and what your entry and exit rules are?

    Thanks again, very kind of you to share.


    • admin
      September 23rd, 2011 at 15:02 | #165


      Hello! I really don’t have a “preferred” box size as my favorite thing to do is to simply attach the indicator, and begin flipping through the different box sizes to see if something “jumps out and grabs me”. Watch the video on Renko Mash for a simple system with Entry and Exit rules. I’m so glad you’ve gotten some good information and tools from my site — pay it forward!


  119. David Hodgson
    August 9th, 2011 at 20:05 | #166

    Hi Kevin
    Great work and thanks for sharing – love the clean charts.
    Just one issue and that’s that the Renko-Offline doesn’t update in real time so it’s not possible to trade off without constantly re-running the script. Once it’s painted it’s static. Now, if you could fix that or tell me what I’m missing then Wow!

  120. Nika
    July 13th, 2011 at 17:35 | #167

    Thank you so much, I’m trading with Renko, but Renko Mash…I would like to try. I think it is very helpfull…

  121. June 25th, 2011 at 15:00 | #168

    Thanks for sharing excellent informations. Your web site is so cool. I am impressed by the details that you have on this website. It reveals how nicely you understand this subject. Bookmarked this web page, will come back for more articles. You, my pal, ROCK! I found just the information I already searched everywhere and simply could not come across. What an ideal website.

  122. June 23rd, 2011 at 18:11 | #169

    So true. Honesty and evreything recognized.

  123. Sharon
    June 19th, 2011 at 22:12 | #170

    I have been looking for Renko charts the past few days and reading reviews. I happened to stumble on yours this morning. I’m excited to get home and install on my main trading computer and test drive this baby! Am I able to use the same activation key on another laptop that I have or do I have to use another email address to get another activiation key?

    • admin
      June 20th, 2011 at 15:23 | #171

      I’m glad that you are looking to use the Zig Renko Charts to supplement your trading!
      You can use the same email address when you put it on your computer at home — you will have to go through the process of installing again, but you can use the same email (once you use your key, it becomes will be issued a new one even though you use the same email address).
      If you have any problems installing, then let me know!

  124. Steve Chafin
    June 11th, 2011 at 09:20 | #172

    New to Renko….excited about your product…

  125. Phil
    June 2nd, 2011 at 07:49 | #173

    A very innovative concept indeed however I have not been able to get the MASH indicator to show anything other than a blank indicator window? Is there some trick to making it show the histogram you illustrated in your video presentation?

    • admin
      June 2nd, 2011 at 13:35 | #174

      Terribly sorry — there was a small bug causing this not to work on certain computers. I have fixed the bug, and now you’re ready to go! Simply re-download and install the software following the same instructions you originally did.


  126. Katy
    May 27th, 2011 at 23:27 | #175

    Simple. Powerful. Amazing. Thank YOU.

  127. Rusty
    May 27th, 2011 at 22:59 | #176

    Don’t get me wrong I love this so much I’ve already made 37 pips! But why is it free?? I would have easily paid alot of money for this. Keep up the good work, I’ll always look for your stuff now!! Go Kevin! You have a loyal follower for LIFE now..

    • admin
      May 27th, 2011 at 23:08 | #177

      That is exactly why I do what I do. I love hearing that traders make great use of my work. Continue using the software, and I’m confident you will rake in the pips for many trading sessions to come! I’ll be constantly working at making new tools for everybody as well, so I will keep you all posted with new and exciting trading tools to come.

      -Kevin Eaton

  128. Zeke sc
    May 27th, 2011 at 22:47 | #178

    Renko is the wave of thE future!! Thank you I’ll let you know how much more pips I make! Thank you Kevin!!

  129. Matthew Schwenke
    May 27th, 2011 at 22:16 | #179


  130. Kira zahed
    May 27th, 2011 at 22:15 | #180

    what a great idea. I’ve Never seen a multi box size renko indicator. Freaking brilliant.

    • admin
      May 27th, 2011 at 22:50 | #181

      Yeah I’ve been using it successfully for months now. I just wanted to pass it along, and help out the community. Enjoy, and let me know how it ends up working!

      -Kevin Eaton

  131. Mike G
    May 27th, 2011 at 22:09 | #182

    What an amazing set of tools! I’ve already changed my strategy to include the MASH indicator and it’s made my strategy much better on day 1! Excellent job Kevin, keep an eye on this guy everybody!


    • admin
      May 27th, 2011 at 22:12 | #183

      Thanks for your kind words! Just doing what I can to help =)

      -Kevin Eaton

  132. May 15th, 2011 at 02:53 | #184

    Don’t forget to leave a comment! Let me know what you think, either about the software or Renko charts in general.

    -Kevin Eaton
    Lead Programmer/Designer
    ZIG Renko Charting Suite

  133. admin
    May 31st, 2012 at 17:03 | #185


    That’s a wonderful idea :-) I’m quite busy as of late (a 7 month old baby is quite a bit more work than I initially thought!) so I can do my best to form the web site in a way where people will benefit from it. We can start a discussion – what does everybody think? Does anybody else have additional suggestions?


  1. No trackbacks yet.